The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.

This module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF parts.

There is an almost limitless fountain of information available for the ESP8266, all of which has been provided by amazing community support. In the Documents section below you will find many resources to aid you in using the ESP8266, even instructions on how to transforming this module into an IoT (Internet of Things) solution!

Note: The ESP8266 Module is not capable of 5-3V logic shifting and will require an external Logic Level Converter. Please do not power it directly from your 5V dev board.

Note: This new version of the ESP8266 WiFi Module has increased the flash disk size from 512k to 1MB.

Features:

  • 802.11 b/g/n
  • Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLLs, regulators, DCXO and power management units
  • +19.5dBm output power in 802.11b mode
  • Power down leakage current of <10uA
  • 1MB Flash Memory
  • Integrated low power 32-bit CPU could be used as application processor
  • SDIO 1.1 / 2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)

Documents:

Write a review

Note: HTML is not translated!
    Bad           Good

WiFi Module - ESP8266-01

  • Product Code: ESP8266
  • Availability: In Stock
  • Rs.400
  • Rs.340


Related Products

WeMos D1 Arduino Compatible board based ESP-8266

WeMos D1 Arduino Compatible board based ESP-8266

his is the old version of WeMos D1.11 digital input/output pins, all pins have interrupt/pwm/I2C/one..

Rs.540

NodeMCU Development Boards

NodeMCU Development Boards

The NodeMcu Lua WIFI Development Board is a highly integrated chip designed for the needs of a ..

Rs.510

ESP32 Development Board

ESP32 Development Board

WiFi + Bluetooth, Dual Core CPUThe development board breaks out all the module’s pins to 2.54 mm hea..

Rs.1,900

WeMos D1 Mini NodeMcu ESP8266 ESP-12F

WeMos D1 Mini NodeMcu ESP8266 ESP-12F

Fully working ESP8266 development board with auto-programming; Program with ease like othe..

Rs.450

ESP8266 SMT Module - ESP-12E

ESP8266 SMT Module - ESP-12E

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you ..

Rs.360 Rs.450

Tags: WiFi Module, , ESP8266, Esp, IOT